fychis
WhatsApp icon to contact FYCHIS about tube bending machines+86 19112905173

CNC Tube Bending Machine Manufacturers: How FYCHIS Builds, Tests and Ships

Comparing manufacturers is not a catalogue exercise. The useful questions are who builds the machine, whose name is on the certificate, and who answers when a die wears out three years later. This page answers those questions for the FYCHIS range instead of listing adjectives.

● What we make, and what we say plainly

FYCHIS is the export brand of Chongqing Fychis Machinery Co.,Ltd, in Chongqing, China, with 16 years in tube and pipe bending. The part of the machine that decides whether a bend wrinkles is not the frame: it is the bend die, the mandrel and the wiper die, and those we engineer ourselves against the customer drawing.

One thing is worth stating before any specification: the CE certificate for the GM-SB and GM-DB series we export is issued to the plant that builds them, not to FYCHIS, and the ISO 9001 certificate is held by that plant as well. A buyer comparing manufacturers should always ask whose name is on the certificate and whether the model is inside its scope. We publish the full certificate data, number and issuer included, because hiding that detail is how a trading company passes for a factory.

● The range, model by model

Published capacities and reference prices are below. Prices are factory-reference figures for the standard configuration; the proforma fixes the final number with the die set, the voltage and the destination port.

ModelMax tube ODWallControlReference price
18CNC-3A-1S18 mmon request3-stack servoon request
25CNC-3A-1S25 mmon request3-stack servoon request
38CNC-2B38 mm2 mm2-stack servoon request
38CNC-3A-1S38 mm2 mm3-stack servo22,000 USD
50CNC-2A-1S (SB)50 mm2 mm2-stack servo16,000 USD
63CNC-3A-1S65 mmon request3-stack servo21,000 USD
75CNC-2A-1S75 mm4 mm2-stack servo25,000 USD
100CNC-2A-1S100 mm4 mm2-stack, auto feeding36,000 USD
100NC-DW100 mm classon requestNC, 20 hp20,000 USD
114NC-DW114 mm15 mmNCon request
168NC-DW168 mm14 mmNCon request
WGD-3838 mmon requestNCon request

Repeatability on the servo models is ±0.1°. Where the table says on request, the figure moves with the die set and the options, so it is quoted rather than guessed. The 38CNC-3A-1S for complex multi-stack bends and the 75 mm CNC tube bender are the two models most export customers start from.

● What actually ships with the machine

The difference between two quotes is often not the machine but the package around it. Every unit ships with the operation and maintenance manual for that exact model, a typed spare-parts list with part numbers, and the certificate copies with their scope pages so you can check your model against the list.

Training is a video session run on the model you bought, covering the five things an operator needs in the first week: loading a program, changing the die, entering angle, radius and feed, checking the first article, and the daily maintenance routine. On request we run a test bend of your part and send the video before the machine is packed, which is the cheapest way to find out that a die needs modifying.

Packing dimensions and gross weight are confirmed in the proforma, because that is what your forwarder quotes on, and the shipping port and country of origin are stated on the same document.

● Five checks before you sign with any manufacturer

  • Read the CE scope, not the logo. Ask whose name is on the certificate, which models are listed and which voltage configuration it describes. A certificate that names a series does not cover a model outside that series.
  • Ask to see the die being machined. A bend die is not a catalogue item. If the supplier can only show a purchased tool, the tooling will not be adapted to your part.
  • Demand a capacity table with wall thickness. A maximum OD without a wall figure means nothing: 50 mm tube at 1 mm wall and at 5 mm wall are two different machines.
  • Ask the price of one wiper die and its lead time. The answer tells you whether spare tooling will be available in year three, which is when it matters.
  • Ask who supports installation. A video and manual are included; an engineer visit is a separate line item with visa and travel, and it should be quoted as such rather than promised vaguely.

● Configure for the destination, not the catalogue

The standard build is 380 V and 50 Hz. Mexico, Peru, Colombia and Ecuador are normally prepared at 220 V and 60 Hz, and other markets are confirmed at the order stage because the electrical configuration follows the customer plant and not the country in general.

The CE certificate describes the European configuration. A 60 Hz machine is the same mechanical machine with a different electrical build, so if your client or your tender asks for a specific document, raise it in the inquiry and it is reflected in the proforma.

Export documents are the commercial invoice, the packing list, the bill of lading and the certificate of origin. The HS code is written in the proforma because duty is calculated on it, and dies and tooling are classified separately from the machine.

● Lead time, warranty and what is fixed per order

Lead time runs from the deposit and is stated in weeks in the proforma; it depends on the model, the die set and the electrical configuration. Warranty is fixed in the same document, per model and per scope, rather than published as one number for the whole catalogue. Consumables, dies damaged by running tube outside their design, transport damage not claimed against the insurer, and modifications by the customer or a third party are outside it.

If your end customer or your tender requires a specific warranty period, say it in the inquiry: it is written into the proforma from the start instead of being negotiated after the machine has been built.

● Where to go next

Send the tube OD, the wall thickness, the bending radius, the material and a drawing. That is enough to come back with a model, a die set and a price instead of a brochure.

COPYRIGHT 重庆鑫锐科信息科技中心@2022