Automatic Pipe Bending Machine for Continuous Production
Model 75CNC-2B and 100CNC-2A-1S. An automatic pipe bending machine removes the operator from the bend cycle: the carriage feeds the tube, the head rotates between planes and the program runs bend after bend without re-measuring. This page explains which model fits which batch size, and what the automatic cycle really saves.
● What automatic means on these machines
Automatic is not one feature, it is four working together: servo feeding of the tube by the carriage, servo rotation of the bending head for 3D shapes, a stored program with the bend table, and a clamp and booster that hold the tube without manual adjustment. When all four are present, one operator can run two machines and the cycle time depends on the bend table, not on how fast someone can read a tape.
- Feeding. The carriage pushes the tube to the exact developed length of every bend, so accumulated error does not build up along the part.
- Rotation. The head turns between planes, which is what makes 3D bends possible in one program without re-clamping the tube by hand.
- Program storage. A part number recalls its bend table; setting up a repeat order takes minutes instead of a full re-setup.
- Correction. Springback and material batch differences are corrected in the program, not by filing the die.
● Models, capacity and price level
| Model | Capacity | Quoted price (ex works) | Best for |
|---|---|---|---|
| 38CNC-3A-1S pipe bender for 38 x 2 mm tube | 38 x 2 mm, three stacks | 22,000 USD | Small parts, high piece count, short cycle |
| 63CNC-3A-1S | 65 mm | 21,000 USD | Mixed batches where diameter changes often |
| 75CNC-2A-1S CNC tube bender, 75 mm tube | 75 x 4 mm | 25,000 USD | Furniture frames, handrails, exhaust parts |
| 100CNC-2A-1S | 100 x 4 mm, automatic feeding and head rotation | 36,000 USD | Chassis, large radius parts in series |
All four models are servo driven and the bending accuracy stated on their pages is ±0.1°. Price moves with capacity, the number of stacks and whether the head rotates. Die sets are quoted on top and are the cost that changes most between two apparently similar orders, so ask for a quotation with the dies included.
● How to choose the capacity
Start from the largest tube you must bend next year, not the largest tube in today's catalogue. Capacity is set by outside diameter and wall thickness together, and stainless loses roughly a quarter of the nominal capacity because of springback and work hardening. If the biggest part is 60 mm carbon steel, a 75 mm machine gives the margin; if it is 60 mm stainless, look at the 100 mm model.
Then count bends per part. Up to twelve bends fit comfortably in one program. Beyond that, split the part into two programs and plan a re-clamp step, or choose a machine with a longer carriage stroke so the tube does not have to be released.
● Installation, training and running cost
The machine arrives assembled, with the dies ordered separately. Installation is leveling, power and compressed air, then a test bend on your own tube. Training runs three to five days on site: programming the bend table, correcting springback, changing dies, and a preventive maintenance routine. The manual and the videos stay with the machine, and support continues on WhatsApp.
Running cost is dominated by three items: dies that wear at the clamp, hydraulic oil changes, and the mandrel for thin-wall work. A die usually lasts tens of thousands of bends in carbon steel and far fewer in stainless. Keeping one spare clamp die on the shelf is the cheapest way to avoid a stopped line.
● Frequently asked questions
Is an automatic pipe bending machine hard to program? The bend table is entered as angle, distance and rotation per bend. An operator who has run a semi-automatic bender learns the table in two or three days; correcting springback is the part that takes practice.
Can it run unattended? No. It repeats the cycle automatically but needs an operator to load tube, unload parts and watch for wrinkles. One operator can usually run two machines.
What tube length can it handle? It depends on the carriage stroke of the model. Tell us the longest developed length in your part and we confirm the model before quoting.
Do you supply dies with the machine? One bend die and one mandrel for the size you specify are quoted in the package. Additional radii are quoted separately.
Tell us the tube size, the number of bends and the monthly quantity. We answer with the model, the dies needed and the delivery time. Compare also the semi-automatic 38NC-DW if your volume is still low, or read automatic vs semi-automatic pipe bending machine before deciding.