CNC Tube Bending Service for Prototypes and Low-Volume Runs
Send your drawing, get bent tubes back. Our shop bends tube on the same servo machines we build for customers, so small batches, prototypes and repair parts do not need a machine purchase. We quote from a STEP, DXF or PDF drawing, make the tooling, run a first article and ship the batch.
● What the CNC tube bending service covers
The service is aimed at projects where buying a machine is not justified yet: 5 to 2,000 pieces, a shape that needs trial bends, or a spare part for a machine already in the field. We bend round tube, square tube and rectangular tube, and we can add flattening, end forming and drilling in the same order.
- Tube outside diameter from 8 mm to 168 mm, wall thickness up to 14 mm on the largest hydraulic model.
- Carbon steel, stainless steel 304 and 316, aluminium, copper and brass. Stainless needs a smaller bend radius because of springback.
- Single plane bends, multi-stack bends, and 3D bends with tube rotation between planes.
- Batch sizes from one-off prototypes to repeating monthly call-offs, with the program stored for the next run.
- Diesel exhaust, furniture frames, handrail, HVAC coils, motorbike and mototaxi chassis, trolley handles.
● How an order runs, step by step
Step 1 – drawing review. Send the part drawing with tube size, wall thickness, bend radii and the distance between bends. We answer within one working day with a feasibility note: what we can hold, what needs a change, and the tooling we need to make.
Step 2 – tooling and quote. Bend dies and mandrel are quoted with the parts. If the shape is new, we model the bend on the machine offline and check the developed length before cutting tube, so scrap stays low.
Step 3 – first article. We bend the first piece, check angle and radius against your drawing and send photos or a video for approval. Nothing runs in volume until you confirm the sample.
Step 4 – production. The approved program runs on a servo bender. Bending accuracy stated on our CNC models is ±0.1°, and the program keeps that repeatability from part one to part one thousand, because feeding length and rotation come from the servo axes rather than from an operator reading a tape.
Step 5 – inspection and packing. Every piece is checked for angle, centre distance, wrinkles, wall thinning and marks. Parts are bundled by bend family and packed for sea or air freight, with the drawing number on every bundle.
● Materials, tooling and what we can hold
Tooling is the part most buyers underestimate. A bend die and a mandrel are needed for every radius, and a clamp die for every tube size. When we quote a service order we tell you which dies already exist for your radius, so you only pay for the new ones.
| Item | Typical capability |
|---|---|
| Tube outside diameter | 8 mm to 168 mm, depending on the model used |
| Wall thickness | 1 mm to 14 mm; thin wall needs a mandrel |
| Bend radius | 1.5D to 5D typical; tighter radius needs checking per material |
| Angle repeatability | ±0.1° on the servo models used for service work |
| Bends per part | Up to 12 bends in one program; more bends run as two programs |
| Surface | Bare, oiled, or protected with interleaved packing for stainless |
● When the service makes more sense than buying a machine
Bending tube in house makes sense above roughly 3,000 pieces a year, or when the same handful of shapes repeats every week and you want to control the schedule. Below that, the tooling cost, floor space, operator training and maintenance usually cost more than paying for parts.
Three cases come to us most often: a new product that is still changing shape, a batch of spare parts for a machine already delivered, and a factory that needs 200 to 500 pieces before it decides to buy its own bender. In the third case we quote the machine and the parts together, so the trial order is credited against the purchase if it goes ahead.
● Quality control on service parts
Inspection follows the drawing, not a general feel. Angle and centre distance are checked on a template or with a digital protractor, radius is checked with a radius gauge, wrinkle and flattening are checked visually against a limit sample agreed at the first article. Wall thinning at the outside of the bend is measured with an ultrasonic gauge on stainless and thin-wall parts.
If a batch fails, we rework or remake before shipping and tell you what changed in the program. Records stay with the drawing number, so a repeat order runs on the same program and the same dies.
● Frequently asked questions
What do you need to quote? A drawing in STEP, DXF, DWG or PDF, the tube size and wall thickness, the material, the batch quantity and the surface you expect. A photo of a similar part helps when no drawing exists.
Can you bend stainless without wrinkles? Yes, with a mandrel and a radius of at least 2D to 2.5D. Tell us the wall thickness; below 1.5 mm we advise a wiper die as well.
How long does a first article take? Three to five working days after drawing approval when the dies exist, seven to ten when new dies have to be machined.
Do you ship worldwide? Yes. Parts go by air for samples and by sea for volume, packed on pallets or in crates with the drawing number marked.
Send a drawing on WhatsApp for a service quote. We reply with feasibility, tooling and a price per piece. If the volume later justifies a machine, the trial order is credited against it. See also the Pipe bender 38CNC-3A-1S with servo axes and the 75 mm CNC tube bender 75CNC-2A-1S we run the service on.